Lexia 3 PP2000 full adapter + 30pin Cable for Old
This item is for Citroen and for Peugeot Diagnostic contains 30pin old line, total 6 lines
Peugeot PP2000 for querying,management function, programming and diagnosing,etc.
Citroen PORXIA3,supports all models of Citroen, for programming, matching,diagnosing,etc.
Latest software support testing all 2012 vehicles models,support the Peugeot 508 Latest software version:For Citroen Lexia V47,For Peugeot PP2000 V25 (11A),Diagbox V7.01 Software
Test systems: Engine,automatic transmission,air conditioning system,SRS,ABS,ASR,MPL,GM,anti-theft system,OBD-II system,and so on.
Testing functions:read fault codes,clear the fault code,dynamic data stream,computer matching program, component testing,etc.It is the maintenance of Peugeot-Citroen car best helper
1.English, 2.German, 3. French, 4. Japanese, 5. Russian, 6. Spanish, 7. Portuguese,
8. Swedish, 9. Turkish, 10. Dutch, 11. Polish, 12. Italian, 13. Hungary, 14. Greek, 15. Czech
System Requirements: Windows XP
Software update: upgrade free 1 year by CD or Email
Lexia 3 PP2000 Functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
1. Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
7. Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
1. Citroen cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 models.
2. Most Peugeot cars from 1995, but it can not work well with Peugeot 307.
If you has these two types of cars, please pay attention. Please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Peugeot Boxer III
Peugeot Boxer III minibus
Citroen Jumper III
Citroen Jumper III minibus
Latest DIAGBOX 3 in 1 software, support testing the latest models
DIAGBOX diagnosis system is Citroen and Peugeot universal of next-generation diagnosis program, it contains Diagbox, PPS, and LEXIA three sets diagnosis program, basically covers all Peugeot and Citroen models.
FOR Peugeot models: 106、107、205、206、207、306、307、308、309、405、408、407、408、508、605、607、806、807、1007、3008、4007、5008、ion、HOGGAR、RCZ、BIPPER、PARTNRT、EXPERT、BOXER etc.
FOR Citroen cars: CITROEN, Elysee,C-QUATRE, Picasso, Xsara and C-Triomphe ,AX、ZX、XM、BERLINGO、C1、C2、C3、C4、C5、C6、C8、C15、DS3、DS4、DS5, and so on.
Lexia 3 PP2000 Description
PP2000/LEXIA-3 Interface latest version, works for both Citreon and Peugeot!
Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.
This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
This item 100% works fine. It is tested by tens of users.
NOTE: Please don't try to disassemble the machine. No warranty if the machine is disassembled!
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x 30pin old Cable
1pc x Instructions for Installation and Activation DVD for Lexia 3 PP2000
Q: What is the way to do more cars?
A: You can choose the S.1279 module of PPS2000 Lexia-3 Citroen Peugeot and use with lexia-3 together. Then it can do more cars you want.
Instruction for Installation and Activation for PP2000
GO TO YOUR COMPUTER'S CONTROL PANEL
SET THE AREA/LANGUAGE TO USA/ENGLISH
START THE INSTALLATION
Activate after installation. The Key Gun is included in the software
Maybe You Also Like: