This Interface allows full diagnostic of BMW's build from 1998 - 2012
Works with INPA, SSS, Progman and others.
Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of FOR BMW from 1998 to 2012 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral
read and delete errors
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard FOR BMW protocol (FOR BMW OBD interface).
E60, E61 od 03/2007
E83 od 09/2006
E81, E87 od 03/2007
E90, E91, E92, E93 od 03/2007
E70 (new model X5)
R56 (new model MINI)
PT-CAN, K-CAN - fully switchable speed of migistral CAN - ou can diagnose driver withtou any car
Protocol "FOR BMW OBD interface" for older cars:
from 1995 to 1998 (don't need K-line).
from 1998 to 03/2012 (all models)
FOR BMW INPA K+CAN
Notice of using INPA:
1.Before using this equipment, keep the battery of notebook fully charged to avoid battery broken. Don’t charge the battery while diagnosing. Before charging, discharge the battery. You may knock down the battery and connect the power line during long time diagnosing. To make sure the battery life.
2.While testing, to make sure the diagnostic lines well connected.
3.Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4.After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5.Don’t cut the power or connector during test.
6.Don’t touch the high temperature components in carriage during test