OBD Discount blog

Welcome to OBD Discount online shop

Micronas OBD TOOL (CDC32XX) V1.8.2

Micronas OBD TOOL (CDC32XX) V1.8.2

Micronas OBD TOOL (CDC32XX) V1.8.2 for Volkswagen

Add NEC24c32 & NEC24c64 algos (some algos for Amarok)
Fix bug of km correction on A4/Q5
Add 95320 immo function.Micronas OBD V1.8.2
Require firmware V2.0.5 or above
Please update firmware to V2.0.5 before use
Update: By EMAIL Micronas OBD V1.8.2

Micronas OBD TOOL (CDC32XX) V1.8.2 Description:

Micronas OBD Tool (CDC32XX) programmer for Volkswagen and Skoda Micronas OBD TOOL (CDC32XX) V1.8.2 cars from year 2006.06 by OBDII diagnostic. VAG Micronas CDC32xx programmer supports Micronas OBD V1.8.2 odometer correction, PIN code read, EEPROM read/write, it is a multi-function and reasonable obd2 product.

Micronas OBD TOOL (CDC32XX) V1.8.2 Highlights:

1. It can do mileage correction for VW cars (after 2006.06) by obd2.

2. It can read pin code for VW Micronas OBD V1.8.2 cars (after 2006.06) by obd2.

3. It can do EEPROM read/write for VW cars (after 2006.06) by obd2.

Micronas OBD TOOL (CDC32XX) V1.8.2 Update version:V1.7.9

Add Passat B7 Color TFT Dash immo and key function support.

(Free for customers who have NEC24C64 authorization)

Newest update version: V1.7.4 Micronas OBD V1.8.2

•Micronas OBD TOOL (CDC32XX) V1.8.2 Fix bug of change km on A3/TT.


New update version: V1.7.3

•Micronas OBD V1.8.2 Fix bug of change km on A4.

•Fix bug of communication with car.

New update version: V1.6.9

Add algo for NEC24c64 Micronas OBD TOOL (CDC32XX) V1.8.2

Micronas OBD V1.8.2 Update version: V1.6.8

Add Change Immo State function for RB8.

Fix a problem of change km on A3/TT.

Micronas OBD TOOL (CDC32XX) V1.8.2 Support Model List:

Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

Odometer correction, PIN code read, EEPROM read/write

Passat B6 from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

EEPROM read/write Micronas OBD V1.8.2

Bora, Jetta from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

Odometer correction, PIN code read, EEPROM read/write

Touran from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):Micronas OBD V1.8.2

Odometer correction, PIN code read, EEPROM read/write

Caddy from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

Odometer correction, PIN code read, EEPROM read/write

Tiguan, Eos from year 2008+:Micronas OBD TOOL (CDC32XX) V1.8.2

Odometer correction, PIN code read, EEPROM read/write

Octavia (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

Odometer correction, PIN code read, EEPROM Micronas OBD TOOL (CDC32XX) V1.8.2

posted by admin in OBD Discount and have Comments Off

PSA BSI tool v1.2

PSA BSI tool v1.2

For Peugeot For Citroen KM Tool PSA BSI tool Odometer V1.2

Software version: V1.2

PSA BSI tool v1.2 Description:

PSA BSI tool is professional odometer tool for Peugeot and Citroen. It can be used to read and write eeprom of BSI, programming new KM in BSI and so on.

431 Diagun III is a newly developed diagnostic computer with full color display screen. By communicating with the powerful DBScar diagnostic connector via Bluetooth or cable, X-PSA BSI tool v1.2 431 Diagun III can test almost all the domestic cars and the imported ones from Asia,PSA BSI tool v1.2  Europe and America. Meanwhile it features high quality test, upgrading fast any where at any time and synchronized with the newest international models. It’s more credible in quality and performance when compared with other products. PSA BSI tool v1.2

Car Cloud website is an portal site and service platform for world-wide automobile aftermarket, which, as one of core Telematics applications, aims to provide data processing and application service for car users and all Telematics service providers of automotive aftermarket by collecting front-end DBS diagnostic data, and combining mobile internet and background cloud processing technology.

Functions for Simens with CAN:

a) Read EEprom memory BSI

b) Write EEprom memory BSI

c) Read BSI flash PSA BSI programming

d) Programming new KM in BSI

Functions for Valeo and Johnsons Control with CAN

a) Programming new KM in BSI

b) Reprogramming flash for PSA BSI programming Johnsons Controls.

Test systems: Engine,automatic transmission,air conditioning system,PSA BSI programming SRS,ABS,ASR,MPL,GM,anti-theft system,OBD-II system,and so on.PSA BSI programming
Testing functions:read fault codes,clear the fault code,dynamic data stream,computer matching program, component testing,etc.It is the maintenance of Peugeot-Citroen car best helper  PSA BSI programming

This diagnostics software allows you to perform complete PSA BSI programming diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
This item 100% works fine. It is tested by tens of users.PSA BSI programming

posted by admin in OBD Discount and have Comments Off



CARPROG FULL V5.94 all 21 Adapters and all Softwares Activated

1.All Software has been activated with all 21 Adapters CARPROG V5.94
2.CARPROG FULL v5.94 is a universal tool for car radios,CARPROG FULL V5.94  odometers, dashboards, immobilizers repair including advanced functions like EEPROM and microcontroller programmer, key transponder programmer.

Latest Version: V5.94
Language: English
CARPROG FULL V5.94  Warranty: 1 year

NOTE:Please don’t update the device by CARPROG V5.94  yourself,otherwise it will be easily damaged.

CARPROG FULL V5.94  Function:

1. Make the Universal tool – CARPROG inside have powerful 16-bit MPU and full set of automotive interface drivers. With basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer,CARPROG FULL V5.94  future possibility’s to make on the same hardware Microcontroller programmer, Immobiliser Transponder Key programmer with antenna adapter for 125/134 KHz, K-line diagnostic (dashboard odometer programming,CARPROG FULL V5.94  immobilizer key programming), CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.

2. Make the Low Cost tool – with CARPROG V5.94  basic you will receive many CARPROG FULL V5.94 extra functions (like car radio code calculator CC1, EEPROM programmer and VAG dashboard’s programmer by CAN) and all additional software’s you can buy extra according your need.

3. Make it Used Easily – Windows XP software,CARPROG FULL V5.94  works without any installations, on all PC, use USB to PC link, all adapters schematics diagrams on-line.

CARPROG FULL V5.94  Softwares:

ECU-OPEL – OPEL login reader from motor hybrid ECU.CARPROG FULL V5.94  Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.
OPEL CAN – Opel ECU by CAN programmer -CARPROG FULL V5.94  read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU
PSG16 - CARPROG V5.94  Opel PSG16 diesel pump by OBDII – read/change mileage, read PIN, reset ECU
OPEC28 – Opel Siemens Simtec ECU Tool Advanced CARPROG FULL V5.94

CARPROG FULL V5.94  CarProg Dash:

S7.1 – VAG CAN programmer CARPROG FULL V5.94 
S7. 2 – CarProg Dashboard programming
S7. 3 – CarProg Dashboard programming package update
S7. 4 – Fiat KM correction by OBDII CARPROG FULL V5.94
S7. 5 – Mercedes Benz ASSYST explorer CARPROG FULL V5.94
S7. 6 – VDO CARPROG V5.94  dash decrypt tool – Skoda Roomster, SuperB, VW Polo, Audi A3, A6, Allroad with 93C86 odometer change and PIN reading
S7. 7 – Ford odometer change by OBDII (by CAN) CARPROG FULL V5.94
S7. 8 – VW 2007+ by OBD – Golf, Passat, Eos, Touran,CARPROG V5.94  Tiguan, Octavia with Micronas by diagnostic
S7. 10 – VAG VDO dashboards by K-line OBDII diagnostic – VW T5, Passat B5, Skoda SuperB and CARPROG V5.94 others 2J74YAUDI – Audi 2J74Y repair software for CarProg CARPROG FULL V5.94

posted by admin in OBD Discount and have Comments Off

VAG Drive Box Bosch EDC15/ME7 Deactivator

VAG Drive Box Bosch EDC15/ME7 Deactivator

Driver Box OBD2 IMMO Deactivator & Activator

VAG Drive Box Bosch Description:

Vag drive box bosch edc15/me7 obd2 immo deactivator corresponds to VAG Drive Box Bosch EDC15/ME7 Deactivator the Bosch control unis types EDC15 (Diesel) and ME7 (Patrol). VAG Drive Box Bosch EDC15/ME7 Deactivator The EDC15 control for diesel engines is installed in the models of brands VW, AUDI,SEAT and SKODA from 1999 onwards.

This box corresponds to the Bosch control VAG Drive Box Bosch EDC15/ME7 Deactivator unis types EDC15 (Diesel) and ME7 (Patrol).
The EDC15 control for diesel engines is installed in the models of brands VW, AUDI,SEAT and SKODA from 1999 onwards.
The ME7 control for Patrol engines up from VAG Drive Box Bosch 1.6 I is VAG Drive Box Bosch EDC15/ME7 Deactivator also installed in the models of brands VW, AUDI,SEAT and SKODA.Also backed up are control unit types ME7.5, ME7.5.1, ME7.1, ME7.1.1

VAG Drive Box Bosch EDC15/ME7 Deactivator User Guide:

Simply plug the Drive Box EDC15/ME7 into the vehicle’s diagnostic socket (OBD2)
Then put the OBD2 and switch to ” OFF ”on Drive box .
After only 20 to 30 seconds the immobilizer DEACTIVATED (IMMO OFF)
NO NEED TO COMPUTER!!! VAG Drive Box Bosch EDC15/ME7 Deactivator
The led on the tool will start to flash slowly, after some seconds the led flashes fast, that mean the immo function is disabled
The car will work without Trasponder key!
Recovery ; VAG Drive Box Bosch switch to ” ON ” on Drive box .
After only 20 to 30 seconds the immobilizer ACTIVATED (IMMO ON)
Adapted for following models,VAG Drive Box Bosch EDC15/ME7 Deactivator
with in BOSCH motronic trypes EDC15(Diesel) or ME7 (Patrol)
AUDI A2/A3/A4/A6 VAG Drive Box Bosch EDC15/ME7 Deactivator
SEAT Cordoba/Ibiza/Toledo/Toledo VAG Drive Box Bosch
SKODA Octavia
VAG Drive Box Bosch EDC15/ME7 Deactivator
SKODA Roomstar
SKODA Fabia VAG Drive Box Bosch
SKODA SuperB (up to 2008)
PORSCHE Cayenne (patrol,old model)
VW Golf IV / Bora (from 2000 onwards)
VW Polo (from 2000 onwards)
VW Caddy (from 2000 onwards)
VW Eos / Tiguan VAG Drive Box Bosch EDC15/ME7 Deactivator
VW Passat 3BG (up 2004 – except 2.5 V6)
VW T4 (from 2000 onwards) VAG Drive Box Bosch
VAG Drive Box Bosch EDC15/ME7 Deactivator

Basically Applies: not for 1,8T and 2,0TFSI models + 1.4 + 1.6 patrol engines.
The Tool on this page are sold exclusively to autohoritis VAG Drive Box Bosch EDC15/ME7 Deactivator and tradespersons with special legatimation for the automobile industry!

VAG Drive Box Bosch Packing List:

1pc x Driver Box OBD2 IMMO Deactivator & Activator

posted by admin in OBD Discount and have Comments Off

VAG DASH K+CAN V4.22 price

VAG DASH K+CAN V4.22 price

VAG DASH K+CAN V4.22 Description:

1.Recalibrate the odometer
2.Add keys to the car even though Wholesale VAG DASH K+CAN V4.22 you don’t have all existing keys available
3.Do key adaptation without 5 minutes delay on new keys
4.Read out the login / secret key code (SKC).VAG DASH K+CAN V4.22 price
NEW: EDC16 / EDC15 / ME7 per OBD den EEprom Lesen und Schreiben (EDC15/ME7 komplett EDC16 derzeit KM stand wird standig VAG DASH K+CAN V4.22 price erweitert.

This high-performance tool covers up VAG DASH K+CAN V4.22 price the new generation of instrument clusters from 2002.
Included are GolfV,Touran, Passat B6, Jetta, the new Seat models, such as Altea II and the VAG DASH K+CAN V4.22 price new Skodas.

VAG DASH K+CAN V4.22 price Function:
This high-performance tool for VW / SEAT /SKODA cars enables you to:
1.recalibrate the odometer  VAG DASH K+CAN V4.22 price
2.add keys to the car even though you don’t have all existing keys available
3.do key adaptation Wholesale VAG DASH K+CAN V4.22  without 5 minutes delay on new keys
4.read out the login / secret key code (SKC) VAG DASH K+CAN V4.22 price
5.write the vehicle identification number and the immobiliser number
6.download and store the entire immobiliser block decrypted
7.clone instrument VAG DASH K+CAN V4.22 price clusters by writing the immobiliser block from a file
8.read out trouble codes of CAN-ECU′s and erase them VAG DASH K+CAN V4.22 price

Those functions are absolute unique and give you the chance to earn the money when you normally have to send away your customer.
VAG DASH K+CAN V4.22 price Examples
An example:
a customer wants an additional key adapted to his car. VAG DASH K+CAN V4.22 price The normal diagnostic procedure requires that all adapted keys are available.Unfortunately your customer brought only one key along.At this point you have to send your customer away (and with him his money VAG DASH K+CAN V4.22 price
Not with VAGdashCAN. You can add a key to the existing ones VAG DASH K+CAN V4.22 price without erasing them. You start the procedure with the new key and after some seconds it is adapted to the car. You don’t have to wait 5 minutes for the adaptation channels to become reachable.

VAG DASH K+CAN V4.22 Another example:
A customer wants to change his instrument cluster. Normally this is procedure with a lot “ifs and buts”. Not with VAGdashCAN, because you are beyond standard diagnostic procedures! Just read out the origin immobiliser block and store it. Then you change the instrument cluster and write the origin immobiliser block into the new cluster. That’s it.VAG DASH K+CAN V4.22 price
No further adaptations are necessary. You don’t need new keys.You don’t have to care for immobiliser type classes

VAG DASH K+CAN V4.22 Software Installation:
1.uninstall the vagdash software first if you installed it before.
2. connect the vagdash Wholesale VAG DASH K+CAN V4.22 cable with the computer
3. install driver first. make sure select USB port, NOT COM port!
4.then install the software.VAG DASH K+CAN V4.22 price

posted by admin in OBD Discount and have Comments Off

Launch X431

Launch X431 In October, 2012, LAUNCH released a creative,Launch X431 simple and practical Creader Professional 123, which leading the auto after-market. Encouraged by this hot Launch X431 sale in market, on April 15th, 2013, carrying forward the classics of Creader Professional 123, LAUNCH released world’s first small DIY device integrated with maintenance and service, Launch X431 named as Creader Professional 129.
Launch X431 Creader Professional 129 is a highly cost-efficient small diagnostic device specially developed for car DIY lovers, Launch X431 small repair workshops and roadside concessions. Fashionable appearance, human-oriented operation interface and powerful function, all these make it possible to do maintenance and service anytime anywhere. Launch X431 The most attraction of Creader Professional is just about the X-431 classics.
Creader VIII is a well built comprehensive Launch X431 diagnostic instrument by Launch. It’s not only including full function of OBDII /EOBD, but also support more functions of four systems (Engine, automatic transmission, anti-lock braking system and airbag) of main car models, such as read and reset code, multi-languages, data stream graphic display, storage and playback Launch X431 of dynamic data stream, and able to provide special functions, such as engine oil light reset, reset brake block, correct steering angle sensor.
The Creader Professional Launch X431 CRP129 supports all 10 modes of OBD II test for a complete diagnosis. Featuring the 3.5” TFT color display, it enables users to read/clear DTCs, record, save and playback data Launch X431 in live graphic display. The CRP129 is also very easy to use. With built-in help menus and code definitions, diagnosing and repairing that dreaded Check Engine Light is now easier than ever!
Moreover, CRP129 also feature the following bi-directional “special tests”:EVAP, Launch X431 O2 Sensor, I/M Readiness, MIL Status, VIN Info, and On-board monitors testing.It can be connected to PC through the USB cable for upgrade to keep updated with the latest software version.
Launch X431 Creader VIII CRP129 Function:

Launch X431 Applicable for all vehicles which match OBDII standard after 1996
Supports all 10 test modes of the OBDII
Launch X431 Display DTC help information and service information
Oxygen sensor test, carbon canister test
OBDII Data Stream Graphic Display
Service light reset function for multiple car models
Cover more than 20 main car models in America,Europe and Asia,Pacific regions
Can test Engine,Transmission,ABS and Airbag systems
Launch X431 Read DTC
Clear DTC
Read Dynamic Data Stream
Support Online Upgrade Launch X431
Launch X431 Creader VIII CRP129 Application:
Launch CRP 129 will help the technician diagnose issues with engine, transmission, Launch X431 SRS and ABS. It will reset DTCs within these systems.Launch X431 Code definitions and most likely causes for the codes will also be available from within the tool itself

Launch X431 Creader VIII CRP129 FAQ:

Q: System halts when reading data stream.Launch X431  What is the reason?
A: It may be caused by Launch X431 a slackened connector. Please turn off the CRP12X, firmly connect the connector, and switch on it again.
Q: Screen of main unit flashes at engine ignition start.Launch X431
A: Caused by electromagnetic disturbing, and this is normal phenomenon.
Q: There is no response Launch X431 when communicating with on-board computer.
A: Please confirm the proper voltage of power supply and Launch X431 check if the throttle has been closed, the transmission is in the neutral position, and the
Launch X431water is in proper temperature.
Q: Why Launch X431 are there so many fault codes?
A: Usually, it’s caused by poor connection or fault circuit Launch X431 grounding.

posted by admin in OBD Discount and have Comments Off

Auto Mileage Programmer

Auto Mileage Programmer

Lastest version: V3.19
Auto Mileage Programmer Language: English, Chinese
Support System: WinXP, Win7
Auto Mileage Programmer Warranty: 1 year

Operation is simple, do not need to desolder CPU, Auto Mileage Programmer reduced operational risk
Increase key and can applicable for key lost at all.Auto Mileage Programmer
AK90 is Auto Mileage Programmer currently the world’s only supports encryption of 1D47J/2D47J safe online read and write device.
AK90 BMW KEY-PROG is a safe and effecitive Auto Mileage Programmer key match tool for BMW EWS system.
It increased EWS2.1/EWS2.2/EWS3/Auto Mileage Programmer EWS3.3/EWS4/EWS4.4 It can read all EWS key information from 1995-2005.

Auto Mileage Programmer AK90 BMW KEY-PROG Description:

AK90 BMW KEY-PROG increased by 1995-2009 in Auto Mileage Programmer all BMW EWS read the key information functions; improved some of the EWS to read and write speed. This product safe and effective, is the key to match the best tool for BMW.Auto Mileage Programmer

-Auto Mileage Programmer Support all EWS system and MCU safety from reading and writing.
-Support all BMW EWS2.1/EWS2.2/EWS3/EWS3.3/Auto Mileage Programmer EWS4/EWS4.4
-Support 0D46J/Auto Mileage Programmer 1D47J/2D47J (encryption)/2L86D safe online reading and writing.
-Support read and write PCF7930/PCF7935/10030A. Auto Mileage Programmer
-Support read all BMW Auto Mileage Programmer (including all BMW EWS/CAS the system key 1995-2009)

Download AK90 key programmer operator guide.pdf

Auto Mileage Programmer AK90 BMW KEY-PROG Functions:

1. Directly reading data dumps from MCU which marked 1D47J , Auto Mileage Programmer 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.Auto Mileage Programmer
2. With the help of software you can renew , lock or unlock keys as well. Auto Mileage Programmer
3. Programming original chips “EML 10030A” for making keys . Auto Mileage Programmer
4. Auto Mileage Programmer Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.
5. CPU reads and writes and the RF chip read and write Auto Mileage Programmer operations are done by one instrument, you do not need other auxiliary instruments

Auto Mileage Programmer How to make BMW car key with AK90 key programmer?

1.remove the chip of ECU, ESL of your BMW car, Auto Mileage Programmer insert it to AK90 diagnostic tool, then it will read the date information of your car.

2.plug the key into ak90 Auto Mileage Programmer programming keys, which reads the data information of your car key.

3.the information of your car and your key is matched, then the AK90 key maker will tell what’s next step, so you just following it is ok, step by step, you will get what you want.Auto Mileage Programmer

When making the new keys, you can insert the ECU and ESL to your car, and insert the key; it can star your car then.

BMW ak90 needs not remove Auto Mileage Programmer chip when making a new key:

1.when program new key, Auto Mileage Programmer no need to remove chip, but connect chip socket to EWS and another interface to AK90 host.

2.directly make new key with Auto Mileage Programmer AK90 key programmer via wiring.

3.no power charger,Auto Mileage Programmer but supply power via USB cable, no need external power; it is supplied with special chip socket.

4.Directly reading data dumps from MCU which marked 1D47J, 2D47J, Auto Mileage Programmer 0D46J, 2L86D without removing MCU from circuit board, easy to do yourself.

5.with the help of software you can renew,Auto Mileage Programmer lock or unlock keys as well.

6.Programming original chips Auto Mileage Programmer ”EML 10030A” for making keys.

7.Identifying keys for all EWS and CAS, showing VIN, key No. It support change VIN,Auto Mileage Programmer but not support do mileage.

posted by admin in OBD Discount and have Comments Off

Auto Locksmith Tool

Auto Locksmith Tool

Super MVP Key Pro M8 Locksmith Tool Auto Locksmith Tool Car Key Programmer OEM

If you are new to the industry or simply looking for a cost effective way to offer a Auto Locksmith Tool key programming service to your customers,then the Key Pro M8 Auto Key Programmer provides the solution. The portable Key Pro M8 Auto Key Programmer is the ideal programming tool that programs keys and Auto Locksmith Tool remotes for all makes of vehicles worldwide – on a ‘Pay As You Go’ basis.
The Key Pro M8 Auto Key Programmer is supplied with all available software FREE.Auto Locksmith Tool We will provide software free update online in one year.
Auto Locksmith Tool Standard Software Version:V10.72
Beta Software Version:V10.86
Auto Locksmith Tool Language:English

MVP Key Pro M8 Auto Key Programmer is with 100 Tokens.
After you use up yours,you can buy more by contacting our customer service.Prices for tokens are as below:
Auto Locksmith Tool 50 Tokens: 510USD
100 Tokens: 850USD
Auto Locksmith Tool 250 Tokens: 1750USD
Never Disassemble The Multiplexer,Auto Locksmith Tool or we will not provide warranty for that

MVP Key Pro M8 Description:

MVP Key Pro M8 Auto Key Programmer is Auto Locksmith Tool the most powerful and cost effective tool for you to add keys and make new keys. It support full range of car models, support online update and very easy to operate. Auto Locksmith Tool Choosing The Key Pro M8 Auto Key Programmer is a worthwhile asset and generates an excellent Auto Locksmith Tool return on investment, by providing an additional income stream for your business.
The Key Pro M8 offers the same coverage /functionality as the world leading AD100Pro, but at a fraction of the cost. Using digital tokens, which are deducted when keys are programmed,Auto Locksmith Tool makes the Key Pro M8 Auto Key Programmer unique.
When all the tokens are used, you simply buy more tokens and download them via the internet. This allows an affordable key programming service to be provided by professional auto-locksmiths and auto-technicians for drivers on the roadside, at home or the office.
The use of transponders in vehicle keys Auto Locksmith Tool means that whenever additional / replacement keys or remotes are required, they must be programmed into the vehicle using specialist diagnostic equipment.Originally, if a customer needed additional keys or remotes, they would have no option but to go to the franchised dealer, Auto Locksmith Tool which could be expensive and inconvenient.
Choosing The Key Pro M8 Auto Key Programmer is a worthwhile asset and generates an excellent return on investment, Auto Locksmith Tool by providing an additional income stream for your business.

MVP Key Pro M8 Function:

- Auto Locksmith Tool All Makes Coverage
- Provide Roadside Programming For Drivers
- Read & Clear Fault Codes
- Clear Key Memory
- Program Keys Auto Locksmith Tool
- Program Proximity / Smart Keys
- Program Remote / Plip Keys
- Program Aftermarket & OEM Keys
- Program Aftermarket & OEM Remote Key Fob’s
- Read Immobiliser Pin Codes
- Read Pre-Code Data
- Display Live Data Auto Locksmith Tool
- Component Actuation
- ECU Identification
- Auto Locksmith Tool Simple User Interface
Some of the functions are manufacturer / model dependent

MVP Key Pro M8 Technical Feature:

- Electronic Tokens Downloaded Auto Locksmith Tool From The Web(need pay for it)
- Standard & Beta (Test) Software Available
- 320 X 240 Dot Matrix LCD Touch Screen
- Connection to Auto Locksmith Tool Vehicle Via OBD Socket
- 12v Power From Vehicle / Mains
- User ID Password Protection
- Internet Software Updates
- Multi System Protocols
- Auto Locksmith Tool Future Proof Design
- Adjustable Contrast
- CAN Bus Interface
- Auto Locksmith Tool USB PC Interface
- Splash Proof
- Auto Locksmith Tool Backlit LCD

MVP Key Pro M8 Advanced Technology:

Designed with simplicity in mind, the Auto Locksmith Tool The Key Pro M8 Auto Key Programmer guides you through various processes for key programming & remote key fob programming, from the more basic keys Auto Locksmith Tool to proximity and smart Auto Locksmith Tool keys across all makes of vehicles worldwide, Auto Locksmith Tool on one programmer. Most vehicle immobiliser systems require security access (Pin Code) to allow keys & remotes to be programmed.The Key Pro M8 Auto Key Programmer reads many Pin Codes, Auto Locksmith Tool providing a high quality, cost effective and valuable service for drivers has never been easier.

Auto Locksmith Tool MVP Key Pro M8 Packing List:

1pc x Key Pro M8 Auto Key Programmer
1pc x Software – All Manufacturers
1pc x Auto Locksmith Tool Protective Carrying Case
1pc x Neoprene Tester Case Auto Locksmith Tool
1pc x Operating Manual
Cables & Dongles Auto Locksmith Tool
1pc x Dongle Case Auto Locksmith Tool

posted by admin in OBD Discount and have Comments Off

Auto Diagnostic Tool

Auto Diagnostic Tool

VAG Auto Scanner VC210 OBD2 OBDII EOBD CAN Code Reader Diagnostic Tool FOR VW FOR AUDI

Auto Diagnostic Tool Description:

The VC210 is specially designed to work with VW/AUDI, Auto Diagnostic Tool including those equipped with the newly released Controller Area Network (C.A.N.) Protocol. Though it is small, it is capable of retrieving same information as large expensive scanners!

Auto Diagnostic Tool Features & Functions:

1. Works with Volkswagen and Audi (Audi / seat / Skoda / Jetta Auto Diagnostic Tool / Golf / Beetle / Touareg / GT / Passat and more) sold worldwide since 1990.Auto Diagnostic Tool

2. Compatible with the latest cars that require a direct CAN connection.Auto Diagnostic Tool

3. Reads and Diagnostic Trouble Codes (Dtcs) Auto Diagnostic Tool of Engine ABS, Airbags and Automatic Transmission.

4. Auto Diagnostic Tool Turns off MIL lights of engine airbag ABS and A/T

5. Highly reliable and accurate Auto Diagnostic Tool

6. Easy-to-read backlit 2 line LCD display Auto Diagnostic Tool

7. Auto Diagnostic Tool Easy to use with one plug-in

8. Stand-alone unit with no need for an Auto Diagnostic Tool additional laptop computer to operate

9. Small in size and conveniently fits in your palm Auto Diagnostic Tool

10. Safely Auto Diagnostic Tool communicates with the on-board computers

11. No batteries needed-powered via OBDII cable Auto Diagnostic Tool

12. Auto Diagnostic Tool One-year warranty against defects

Auto Diagnostic Tool Specifications:

* Display: Backlit LCD, 2-line, 8 characters Auto Diagnostic Tool

* Operating Temperature: 0 to 50°C (-32 to 122 F°)

* Storage Temperature: -20 to 70°C (-4 to 158 F°) Auto Diagnostic Tool

* Power: 10.0 to 15.5 Volts provided via vehicle battery

* Dimensions: Length: 113 mm ( 4.4”), Auto Diagnostic Tool Width: 74 mm ( 2.9”), Height: 21mm (0.83”)

* NW: 0.25 Kg(0.45lb), Auto Diagnostic Tool GW: 0.27Kg(0.50lb)

Auto Diagnostic Tool Packing List:

1 x VC210 Main Unit

1 x Hardcopy Manual Auto Diagnostic Tool

posted by admin in OBD Discount and have Comments Off

Genuine Lishi Tools

Genuine Lishi Tools Zed Bull Function:
1. Finding PIN Code, preparing precoded transponders and Genuine Lishi Tools programming transponders from EEPROM and MCU.
Zed-BULL PC software’s excellent features will help you while using EEPROM applications. ECU pictures, which ECU has which MCU or EEPROM and the location of mcu or eeprom on the board, Genuine Lishi Tools which type transponder will be used… These kind of information will ease your work.Genuine Lishi Tools  With Automatic Module Finding (AMF) feature, when you select the EEPROM file, the module will be recognized automatically
Another revolution of Zed-BULL is programming transponders when there is no Genuine Lishi Tools key from ECUs. For now, Zed-BULL has 55 different applications and it is increasing… With this feature, you can program transponders, find pin codes and prepare precoded transponders for the cars which need precoded transponders like fiat doblo 48. For this feature, you don’t need expensive precoded transponders priced about 8-10 Euro.Genuine Lishi Tools You can use blank transponders.

2. Zed Bull Key Programmer Transponder Cloning 11, 12, 13, 33, 73, 4C Genuine Lishi Tools (writing to 4C electronic key and battery less TPX1 transponder), Philips Crypto 40 (some), 41(all), 42(all), 44(all unlocked VAG), 45(all).
Until now, common transponder cloning tools could only copy fixed transponders. But the revolution that we started with our device, Zed-Qx, is increasing with Zed-BULL. 41(NISSAN), 42(VAG), Genuine Lishi Tools 44(Unlocked VAG) and 45(PEUGEOT) transponders which normally known as can not be copied, can be copied with Zed-BULL. Also you can copy 4C transponders onto batteryless Genuine Lishi Tools TPX1 4C glass transponders

3. Genuine Lishi Tools Producing Transponders for OBD Programming
If you have an OBD device like T-Code Pro, you will Genuine Lishi Tools need special precoded transponders for some cars. Instead of buying these special transponders for high prices, you can produce them with Zed Bull Key Genuine Lishi Tools Programmer using blank transponders. And you don’t need expensive precoded transponders priced about 8-10 Euro… The transponders that you can produce: 40, 41, 42, 44 Mitsubishi, 44 VAG, 45, 73 Mitsubishi, 61, 62, 65 Genuine Lishi Tools and 46 for BMW, AUDI, PORSCHE, CHRYSLER, RENAULT… etc. For now, Zed-BULL has 24 different transponder Genuine Lishi Tools production applications.

4. Genuine Lishi Tools USB communication and fast update
You can update your Zed-BULL in less than 30 seconds and Genuine Lishi Tools use your Zed-BULL with PC via USB

5. Genuine Lishi Tools Hitag2 Transponder Programmer
If you want to buy a hitag2 programmer as standalone device, Genuine Lishi Tools you have to pay around 1000-1500 Euro. But when you have Zed-BULL, you will get this hitag2 programmer feature for FREE. You can work on hitag2 transponders and Genuine Lishi Tools improve yourself on your job.

6. Genuine Lishi Tools Easy Use with Wide Graphic LCD Screen.
Wide screen of Zed-BULL will show you much more….Genuine Lishi Tools  With Zed-Bull’s wide screen, you can see more information like, VIN number and kilometer info for BMW cars, detailed information for 46 and 48 transponders Genuine Lishi Tools… etc.

7.Genuine Lishi Tools Additional function:
1) Reading kilometer, VIN number and key number information from original Genuine Lishi Tools BMW key and writing to original BMW remote key
2) Finding PIN Genuine Lishi Tools code from VIN number for HYUNDAI and KIA
3) PC software includes a wide-range transponder catalog,Genuine Lishi Tools key fob procedures and more information
4) PIN code finding for 33 Renault and 45 Peugeot from transponder
5) Unlocking the 48(magic II) Genuine Lishi Tools type locked transponder and make it re -usable
6) Saving transponder information into database including crypto transponders Genuine Lishi Tools
7) 3 different device case of Genuine Lishi Tools Zed Bull Key Programmer color alternatives (red, black and white).Genuine Lishi Tools

posted by admin in OBD Discount and have Comments Off