This Battery Analyzer is designed to test batteries using a series of short Pulsed DC Impedance method. This testing method is more accurate than conv......
This Battery Analyzer is designed to test batteries using a series of short Pulsed DC Impedance method. This testing method is more accurate than conventional resistance load testing. The battery can be tested whilst still fitted to the vehicle and also allows tests to be carried out right in front of the customer at the same time giving instant results and enabling accurate diagnosis. This gives the customer more confidence and gain maximum impact when giving him your recommended actions basing on the results.
Simple and easy to use
Test batteries on and off the vehicle
Accurate results in milliseconds
Battery Life Analysis
Analysis Result : Good or Replace
Large easy to read LCD display.
Test results based on JIS, EN, DIN, SAE and IEC Standards.
Test Result: Good or Replace
Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value
Life in percentage (%)
Use to test a wide range of 12V battery types including Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and Gel. The major battery standards JIS, SAE, EN, DIN and IEC are supported.
System voltage : 12 Volts
Input voltage range : 9V~15V
Power requirements : No internal batteries required. Power on when hooked up during testing.
Testing range : 100 ~ 1700 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN
Test Time : 1 seconds