Crankshaft sensor signal generated by the instrument ,which pass into the ECU to make it work .To Judge the ECU with or without fuel injection, ignition signal depends on the instrument panel indicator light shining or not , in order to determine the ECU is good or not.
A variety of sensor signal ,crankshaft、camshaft、 water temperature can be generated .It apply to ECU maintenance tests or simulate the water temperature、crankshaft and other types of sensors in the car repair.
Be used for measuring voltage、current and waveforms. The oscilloscope function can be used to PC board repair、fuel injection、ignition pulse-width view etc..
1. The only true color screen display
It display clear pictures, including ECU pictures, pin definitions, the vulnerability of the IC pictures. It is intuitive for using, and maintenance more convenient.
2. The only touch operation, and also with a keyboard alternate
Touching operation is easy for using, and with the keyboard for an alternate.
3. Intelligence test, no need self-adjust the frequency, waveform, or differentiate between positive and negative touch
Select the ECU model, the instrument will automatically generate the corresponding crankshaft sensor waveform ,and set the ignition’s positive and negative trigger too.
4. Up to 12 channels of waveform output
Two crankshaft, two camshafts, oxygen, detonation pressure, throttle, air flow, water temperature, oil temperature, air temperature etc..
5. Either hand-held, can also be connected computer for using
Hand-held operation is convenient, touch screen-operation, color display; operating while connected with computer, you can check the relevant ECU picture, pin definitions, and detailed.
6. The waveform is various
Can generate sine wave, square wave, by upgrading can also generate arbitrary waveforms, such as hand-drawn waveform.
7. The precise frequency
The frequency resolution could be correct to 1HZ , analog sensor is more accurate.
8. Waveform voltage is arbitrary adjustable
In addition to the normal 0 ~ 5V,-2.5V ~ +2.5 V, but also can produce special signals, such as 0.5V~0.8V new signal.
9. The guide cue, easy to use
Matching Software sets with various types of ECU pictures, maintenance methods. According to the type of car to select the appropriate menu, complete the test step by step.
10. Waveform synchronized
Up to four synchronous signal, crankshaft and camshaft synchronization signal.
11. Long-distance upgrade
USB long-distance upgrade, and increase vehicle type etc..
1pc x AUTOECU Main Unit
1pc x 12v switch power supply
1pc x Instructions
1pc x Software CD-ROM
1pc x USB cable
1pc x Scope Meter pen
20pcs x With plastic plug cable