Autel AutoLink Next Generation OBD II & Electrical Test Tool AL539
Language: English,Espanol,Francais
Feature:
Works on ALL 1996 and newer vehicles(OBDII & CAN)-domestic and import
Features the unique patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification
Easy-to-read AVOmeter allows you to test voltage, continuity and current at the fingertip
Capable of diagnosing 12V charging systems, starting systems and condition of discharged battery
Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
Easily determines the cause of the Check Engine Light (MIL)
Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays monitor and I/M readiness status (emissions)
Reads live PCM datastream, live O2 sensor test data, freeze frame data
Graphs data (1996 and newer)
Troubleshooter codes tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu and DTC definitions-English, Spanish and French, etc.
Retrieves vehicle information (VIN, CIN and CVN)
Internet updateable and upgradeable
Prints data via PC
Description:
The AutoLink® AL539 OBDII & Electrical Test Tool supports all 10 modes of OBD II test for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, circuit test, starting and charging systems test, TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
Vehicle Coverage:
The AutoLink AL539/AL539b OBDII/EOBD Scanner is specially designed to work with all OBD II compliant vehicles, including those equipped with universal protocol -- Control Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles. A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate “OBD II Certified”. Additionally, Government regulations mandate that all OBD II compliant vehicles must have a “common” sixteen-pin Data Link Connector (DLC).
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Specifications:
1) Display: TFT color display (320 x 240 dpi)
2) Operating Temperature: 0 to 60°C (32 to 140 F°)
3) Storage Temperature: -20 to 70°C (-4 to 158 F°)
4) Dimensions:
Length:175 mm (6.91”)
Width :96.6 mm (3.80”)
Height :37 mm (1.46”)
Tool Description:

1) OBD II CONNECTOR – Connects the scan tool to the vehicle‟s Data Link Connector (DLC).
2) LCD DISPLAY – Indicates test results.
3) GREEN LED – Indicates that engine systems are running normally (The number of monitors on the vehicle which are active and performing their diagnostic testing is in the allowed limit, and no DTCs are present).
4) YELLOW LED – Indicates there is a possible problem. A “Pending” DTC is present and/or some of the vehicle‟s emission monitors have not run their diagnostic testing.
5) RED LED – Indicates there is a problem in one or more of the vehicle‟s systems. The red LED is also used to show that DTCs are present. DTCs are shown on the Scan Tool‟s display. In this case, the MIL lamp on the vehicle‟s instrument panel will light steady on.
6) One-Click I/M Readiness Key – Quick-checks State Emissions readiness and drive cycle verification.
7) ESC BUTTON – Cancels a selection (or action) from a menu or returns to the previous screen.
8) LEFT SCROLL BUTTON – When look up DTC definitions, moves to previous character and views additional information on previous screens if DTC definition covers more than one screen; deselect all marked PID data when viewing or recording customized live data list; views previous frames of recorded data when playing back live data. It is also used to update DTC library when pressed.
9) POWER BUTTON – Press and hold for 2 seconds to turn the scan tool on and off. Press and then release to view ? help information.
10) UP SCROLL BUTTON – Moves up through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves up through the current screen to the previous screens for additional data.
11) OK BUTTON – Confirms a selection (or action) from a menu.
12) RIGHT SCROLL BUTTON – When look up DTC definitions, moves to next character and view additional information on next screens if DTC definition covers more than one screen; selects/deselects PID data when viewing or recording customized live data list, and views next frames of data when playing back live data.
13) DOWN SCROLL BUTTON – Moves down through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves down through the current screen to next screens for additional data.
14) VΩ TERMINAL – Assists voltage and/or resistance test as a lead.
15) COM TERMINAL – Assists test as a ground lead.
16) mA TERMINAL – Assists current (0~200mA) test as a lead.
17) A TERMINAL – Assists current (0~20A) test as a lead.
18) USB CONNECTOR – Connects the scan tool to the PC for printing and upgrading.
19) EXTERNAL DC POWER PORT – Connects the 5 volt power adapter to power the tool when disconnected from the vehicle or charge the battery.
20) STAND – Flips out for supporting the scan tool.
Package List:
1pc x Main Unit
1pc x User’s Manual -- Instructions on tool operations.
1pc x CD -- Includes user‟s manual, MaxiLink update software, and etc.
1pc x OBD2 cable -- Provides power to tool and communicates between tool and vehicle.
1pc x USB cable -- Used to upgrade the scan tool, and to print retrieved data.
1pc x 3.7V Li-ion battery -- Provides power when disconnected with vehicle.
1pc x Probes -- Contacts the circuit or component to be tested.
AutoLink AL539 Only:
Protective Nylon Case – Contains the main unit and cables while not in use.
AutoLink AL539B Only:
Battery test cable -- Used to contact the terminals of vehicle battery.
Carry case -- A nylon case to store the scan tool when not in use.